Yup ernie leo is correct, older PSU's don't have all of the needed plugs and will need an adapter.  The secondary power connection is usually behind the CPU towards the back of the case.

The old PSU had two power connectors. The new one has two as well. Both were plugged in. Seriously guys I think the mobo is dead. I have nuked my new hard drive, and I think I will just install Linux to turn the machine into a Internet terminal and music player at this point until we figure out what we are going to do. No sense installing Windows now only to reinstall it again down the road.

Any ideas on a fix? I guess I need a AM2+ mobo. I would send the old one back if I could afford it.

By the way a big thank you to DoorTech. This LCD monitor rocks.

Kona, I do not believe for one minute 3btech refurbished a board and it is dead now. If the cpu is not compatible, which it is not, you would get no post beeps . So, lets lean that direction.

I said if you checked on it, they will probably just send you a prepaid shipping label, so no cost, and maybe we could exchange it. Just a thought on a easier way to get you going.

Also, I apologize for my reading errors again.

Can you do some searching on cpus for that board, ebay or elsewhere, see whats available.

Wizard, or whoever corrected me, my bad on the processor, it is amd, but, not dual core, would fit maybe , I will dig it out if needed to make sure I am not remembering it wrong.

I have a AMD Athlonx2 in my machine. If that is compatible with yours, I may consider upgrading and send you my old one. Its early and I can not think yet, so if this is jibberish I apologize. Will mine fit?

I will check with you after work. Keep positive man, we will get it working.

Last thing, do any of the case fans that plug directly to the board or the cpu fan work when powered up? If so, this would indicate something is flowing through the board, meaning cpu could be the only setback.

The part that is confusing me is the x2, is that the same as am2+. Anyone?

*If you use AM2+ CPU on AM2 chipset motherboard, the system bus speed will downgrade from HT3.0 (5200 MT/s) to HT1.0 (2000 MT/s), but the CPU frequency will not be influenced.

Just found this, it was at 3btech printed under that board I mentioned. Kinda implies the processor should work. That would mean a bad board. I hope you check that return policy and details. Let me know, us know.

Sounds good, and I agree.

Yes the CPU fan spins up. I do not have a case fan plugged in to the board., The board also will shut down if the power button is held down. Reset button also works. Just no beeps.

I think the baord and CPU are not compatible. All I could find is that this board works with AMD X2 and Sempron CPUs. No mention of this board running a Phenom CPU.

Up and running with Fedora 18 Linux for the time being. Not sure what to do. Pulling my hair out. Think I shed a tear or two.

Do we want a board from the same place if it is a bad board?

My cpu will fit, but if the board is bad, no help, and if the board is bad, that means the info is probably right and the cpu you have will fit if you just had a good board.

That kinda leaves us at the mercy of return procedure and you have the invoice, so could you check on the details of return and exchange.

At this point I don't know if the board is bad. I will not know until we put a AM2 CPU in it to see if it will fire up. As for the RMA process I can request a RMA form but I will still have to send it back. I can't do that.

So I guess my options are to use Fedora or Windows XP. I thought I would be done using XP by now. Sigh.

Thanks for the help guys. Sorry.

Okay, first apologies for being all over the place, very confusing.

I did some research and my board is an am2+ socket with support for amd socket939/940/am2/754and socket F. which means I am in good position boardwise to upgrade as it supports phenom cpus and such.

Also , the processor I have will run yours, it is dual core 3.0 gig125wattcpu amdx2{dual core} I think that is the x2 reference.

Which also means your board which I did not see in specs, does not support am2+, .

So, let me, after work and I am already late, oh well, check which route is better. An upgrade for me or just a cpu or different board for you.

Still you could check that return policy, would help greatly and I will help with costs, but I am hoping for free exchange. Just keep me updated somehow and I will chat after work, DT1,

It should cost less than $5.00 to ship it ground to anywhere in the US...you really can't afford that?

Nope. I have maybe a quarter to my name. Sorry.

That's what I got when I did a bit of checking, that the Phenom II series is not backwards compatible to AM2.  I have a vague recollection that they are forward compatible to AM3, just not the other way.  Anyway, let's see if we can get this current board exchanged for an AM2+ one... I'm sure that'll get the business done... just like when I swapped the AM3 and AM3+ CPU's to their respective sockets.

Might be an issue getting them exchanged. I don't recall where I put the receipt and besides I am not the one that bought it. Did I ruin the board by running that CPU in it? Or did I burn out the CPU?

What speed is your ram? The new motherboard only supports DDR2 800

is the vendor 3btech in south bend? i've dealt with them before....many years ago. after that experience, i'll never deal with them again. i actually took a mobo and cpu in to their office/display building to prove they didn't work (they're only an hour or so up the road). even though they admitted the units didn't work, they still refused a refund because i had waited 3 or 4 days after taking delivery of the items before bringing things to their attention. sorry, i had kidney stone surgery before i worked on the person's rig. you can bet your rear end they were reported to the BBB as soon as i got home.